How to Make Melted Pony Bead Stars

We all have Pony Beads in our piles of craft supplies, if you don’t, you need to get some! Making melted Pony Bead crafts is fun to do.

HOW TO MAKE MELTED PONY BEAD STARSI used three different sized metal star cookie cutters to make mine.

PONY BEAD STARS1Pour your Pony Beads into your cookie cutter and make sure that you have enough to fill up all the space inside the cookie cutter. You can then arrange the beads around a bit to distribute the colors. Make sure your cookie cutters are on a metal cookie sheet too.

PONY BEAD STARS2Once you have all the beads where you want them, they are ready to bake.

PONY BEAD STARS3Place in your oven at 400 degrees, and watch them closely as they melt. There will be a slight smell from the melting plastic, so you should have your windows open or run a fan while melting the Pony Beads. (note: you can also melt them on your grill too outside) You will know when they are ready to be taken out of the oven when the top of the Pony Beads are nice and flat. (if you still see the “humps” of the beads, then they will need to stay in the oven a few minutes longer)

PONY BEAD STARS4Once all the beads are nice and flat, remove them from the oven and let them cool on top of the stove. You will soon hear a slight crackling sound, and don’t worry, this is the plastic cooling sound.

PONY BEAD STARS5When cooled, you can pick up your cookie cutter and remove the melted Pony Bead stars. Just carefully pull the sides apart of the cookie cutter and the star just pops out.

HOW TO MAKE MELTED PONY BEAD STARSIf you so choose, at this point, you can use a small drill bit and drill right through the melted Pony Bead stars so you can add a ribbon for hanging. Or, you can perhaps hot glue a wooden skewer to the back of the stars and place in a flower pot for a nice decoration. With these three sizes, I also had the idea to make a little tiered sun catcher for the Fourth of July. To accomplish this, you will need to drill a small hole on the top and bottom of the stars so you can attach your string in between them for hanging.

So there you have it, you can now make your own melted Pony Bead Stars and you will be ready to ring in your Fourth of July in style!

In case you missed my other melted Pony Bead Crafts, here are the links to inspire you:

Pizza Pan Patriotic Platter
Experimenting with Melting Pony Beads
Melted Pony Bead Hearts
A Pizza Pan Is Just Not For Pizza Anymore
How to Make a Night Light Cover

Advertisements

Pizza Pan Patriotic Platter

Oops, I did it again!  I pulled out my Pony Beads today and created a Pizza Pan Patriotic Platter.  With the Fourth of July coming up, I decided that I needed a platter to show off my goodies, like my Patriotic Strawberries, or perhaps some garnishes.

PIZZA PAN PATRIOTIC PLATTER

Just like my other Pony Bead projects, I just poured the beads onto the pizza pan and used red, white and blue beads, just perfect for the Fourth of July.  Make sure you fill up all the holes on the pan and all of the edges have a bead touching it.

PIZZA PAN PATRIOTIC PLATTER MELTING IN OVEN

Once the pizza pan is completed filled (one layer of beads only), place in a pre-heated oven at 425 degrees.  Watch the beads closely, as they will melt quickly.  Keep a fan on or open a few windows to let out the light smell from the melting beads.  (Note:  You can also melt them on your grill outside, just make sure to leave the lid open so as nothing accidentally drops into the plastic while it is melting)

PIZZA PAN PATRIOTIC PLATTER COOLING

You will start to see the beads starting to melt in the pan.  The way you can tell that your project is completely melted, is when the top is completely flat and smooth.  If you still see some bead “bumps”, then it needs to stay in the oven a little longer.  Carefully remove from the oven once the top is completely flat & smooth.  Place gently on top of stove to cool.  You might hear a slight cracking sound, but that is just the plastic cooling, so do not worry.

Once the pan is completely cooled, just turn the pizza pan upside down and the platter will pop out.  Easy, right?

PIZZA PAN PATRIOTIC PLATTER MADE BY MELTING PONY BEADS

Now all you need to do is take your Glass Candlestick that you got at the Dollar Store for $1 and hot glue it to the direct center on the bottom of the platter.  You’re done!  You have now created a Patriotic Platter that everyone will wonder where you got it….only you will know that you made it! (NOTE:  I would not suggest using any sharp knife on the platter as it will most likely scratch the plastic)

GLUE GLASS CANDLESTICK TO PLATTER

Since I had some red, white and blue Pony Beads left over, I decided to make a Patriotic Star out of a metal cookie cutter.  I just placed the metal cookie cutter in a round cake pan, filled the metal star up with Pony Beads and melted it in the oven.  Once it has cooled, just slightly pull on the sides of the metal cookie cutter to release the star and it will pop right out.  I will probably drill a small hole in the top of this star and hang in my kitchen window for a little Patriotic charm!

PONY BEAD STAR

PONY BEAD STAR MELTING

PONY BEAD STAR COOLING

PONY BEAD STAR POPPED OUT OF COOKIE CUTTER

So there you have it, a Pizza Pan Patriotic Platter and a Patriotic Star all made within a few minutes of an afternoon!  What a great craft project to share with your kids, or make one for yourself!

If you missed some of my other Pony Beads crafts, you can find them below:  

Pizza Pan Suncatcher
Pony Bead Hearts

A Pizza Pan Made Me Popular

PONY BEADS SUN CATCHER7

Just when I thought that this week could not get any better than what it was, it happened.  The Editor of All Free Kids Crafts contacted me and wanted to feature my Melted Pony Beads Pizza Pan Sun Catcher on their website!  I was tickled pink that she contacted me and this news just made my day.  Thanks Jaclyn!

I never knew that a pizza pan could make me popular, but it did!  I love crafting and seeing what I can come up with next.  It’s the thrill that you get when you try something new and it works.

Here is the link to my original post:  Pizza Pan Sun Catcher
Here is the link to my featured Pizza Pan Sun Catcher on http://www.allfreekidscrafts.com

This particular pony bead craft is extremely easy to do!  Just grab your pony beads and pour them out onto a pizza pan.  Make sure that there are no holes, just add more beads.  Pop your pizza pan into the oven at 425 degrees for a few minutes (watch through the oven door to see them melt) and when all the beads are melted, and the top appears to be smooth, it’s time to remove them from the oven.  Now, just let your pizza pan cool on top of the stove.  You will hear some cracking noises, but that is just the plastic cooling.  Once cooled, just turn the pizza pan upside down and the round disk will pop right out!  Then, if you are going to hang this up as a sun catcher, just drill a small hole at the top for a string.  Also, I made a cupcake stand too, just by purchasing a $1 glass candlestick holder from the Dollar Store and gluing it to the bottom of the plastic pizza pan sun catcher!

PONY BEADS SUN CATCHER8

So, head on over to All Free Kids Crafts today to see what you are missing!  They have tons of wonderful neat crafts for kids!  www.allfreekidscrafts.com

I just never knew that a pizza pan could make me popular!

Experimenting With Melting Pony Beads

SUNFLOWER MELTED PONY BEADS COLLAGE

Oops, I did it again!  I keep looking at all of the things that I have made by melting Pony Beads and I wondered if they could be melted without a form around them.  Hmmmm….interesting thought, so I had to get to work to see what would happen without a cookie cutter form around them.  I pulled out the old pizza pan that I have been using and started to design.

SUNFLOWER MELTED PONY BEADS 3

Since Spring is supposed to be around the corner, I am dreaming of gardening and this year we are going to plant a new kind of sunflowers in our garden for color.  (man I can’t wait)  With that thought on my mind, I started to create a sunflower out of Pony Beads on the pizza pan.  I started out with a black center of beads and then formed yellow sunflower leaves around the middle.  Then I added a green stem and only added clear beads around the right side of the sunflower for filler.

SUNFLOWER MELTED PONY BEADS 2

Since I wanted to see what happens if you melt Pony Beads without a form, my experiment turned out quite well and the Pony Beads melted perfectly and the sunflower leaves on the left side of the pizza pan turned out just like leaves!  Yippee!  So this tells me that if you want to create a free form kind of art with melting Pony Beads, you can!  Design away!

SUNFLOWER MELTED PONY BEADS 1

If you don’t have any Pony Beads, head out to the store this weekend and pick up a nice big bag and get crafting!  This truly is a fun craft to do and the more creative you are, the more interesting your items will turn out!

Melted Pony Bead Hearts

HEARTS

I just can’t seem to leave these pony beads alone lately!  Since I have had great luck with making my sun catchers and future wind chimes from melting pony beads, I had a thought today and wanted to see if I could melt the beads in a cake pan – – – inside a heart cookie cutter.  I know, if this experiment failed, then I would have to throw out my two heart shaped cookie cutters, but I was feeling lucky and tried it anyways.

MELTING PONY BEADS IN COOKIE CUTTERS

I placed two different sized metal heart shaped cookie cutters inside an old cake pan, then filled both hearts with different colored pony beads.  I made sure that I filled up the hearts with enough beads to fill the cookie cutter from edge to edge.  Then, being a little nervous at trying this, I placed them in the oven at 425 degrees, and watched them closely.  When the beads were completely melted and the tops were completely flat, it was time to remove them.

POPS OUT OF COOKIE CUTTER

I set them out to cool completely.  Now, came the time to see if I could actually remove them from the cookie cutters.  Man, I was nervous, but all worked out in my favor and they popped right out!  Yeah!  I will now get the drill out and drill a small hole near the top of each heart and hang them in our window for Valentine’s Day.  Now, I wish I had a huge heart shaped cake pan to make a large heart sun catcher!  A girl can dream, eh?

HEART FROM MELTED PONY BEADS

So what do you think of these heart shaped melted pony beads?  Are you going to try to make some for yourself?  If you do, I want to see them!

SIGNATURE BOX VALERIE AT NIKITALAND

A Pizza Pan Is Just Not For Pizza Anymore

PONY BEADS SUN CATCHER7

Everyone loves a good craft idea, and today seemed like a good day to craft up a good one so I pulled out my vast supply of different colored pony beads and got to work!  I grabbed my older pizza pan and started pouring different colored pony beads into the pan.  I made sure that I added lots of clear ones to give a nice see through look once it is completed.  I made sure that I poured enough pony beads onto the pizza pan to cover the entire pan and the beads were close and touching each other.  Once I had enough beads in the pan, it was time to melt them!

PONY BEADS SUN CATCHER1

PONY BEADS SUN CATCHER2

Set your oven to 425 degrees and get it nice and hot.  Once your oven has heated up nicely, carefully place your pizza pan in the oven.  Now the waiting begins.  Since I have already done this type of craft project last year, I used our gas grill to cut down on any of the stinky smell from the beads melting, but today, I just opened up the windows and turned on the ceiling fan to rid any odor.  Just so you know, the melting beads did not create much smell in the house, but since we are having a nice warm day for a change, having the windows open for fresh air was nice.

PONY BEADS SUN CATCHER3

Watch your beads now closely.  You will see the beads starting to melt after a few minutes in the oven, as they will get glossy looking.

PONY BEADS SUN CATCHER4

Keep watching them as they melt into each other and form a nice flat edge around the pan.  You will know when they are done & ready to remove from the oven when you cannot see any “bumps” or “hills” on the top of the melted beads.  If you see little bumps, they need a few more minutes in the oven.

PONY BEADS SUN CATCHER5

Once the top of your beads is flat, remove from the oven.  Set pizza pan on top of the stove to cool.  In a few minutes, you will hear the strangest cracking noise, but don’t fret, as this is just the plastic cooling and it is nothing to worry about.  (it scared me the first time I heard it too, and even the dogs ran and hid)

PONY BEADS SUN CATCHER6

After a few minutes of cooling, carefully touch the pizza pan to see if it has completely cooled.  If it is still warm to the touch, let it sit longer to cool completely.  Do not remove your item from the pan until it has completely cool or it could lose its shape.  Once completely cooled, you can now turn the pizza pan upside down and your melted beads will now pop right out of the pan!

PONY BEADS SUN CATCHER8

 

PONY BEADS SUN CATCHER7

I made this item today so I can get ready for Spring!  I will turn this into a sun catcher and add some wind chimes to the bottom.  What a beautiful piece it will be when the sun shines through it.  This item that I made can be drilled too!  I will use a drill for a hole at the top, and for the small holes to hang the wind chimes on too!

Also, while I was looking at the finished product on my table, I also thought that this would make a neat cupcake platter too!  I would probably want a little stand on it, so I could head on over to the Dollar Store and purchase a glass short candle holder for $1 and glue it to the underneath center of the melted beads platter.  Whala, instant cupcake stand!

If you have any pony beads just laying around – I encourage you to pull them out the get crafty!  I will never think of my pizza pan the same again, as I found out that it is just not for pizza any more!

2012 Craft Projects Review

2012 Craft Projects by Valerie

I can’t believe yet another year passed us by, as 2012 came to an end and we’re ready to start a brand new year….and some new craft projects too!  I thought it would be fun to share with you some of the craft projects that I made last year, and I definitely look forward to a new year of inspiration and creativity as I delve into some new areas.  I am sure that I have overlooked a lot of crafts for this post, but not because I did not like the outcome of them, rather the amount of them, and it was hard to choose which ones to show.

Not all of my crafts had a DIY tutorial with them, but I wanted to share with you the large list of projects that I tackled this year, which actually surprised me when I was putting this post together.  Looking at the photo above, from left to right, are just a sampling of the crafts I made:

  1. CEMENT HAND BUSINESS CARD HOLDER:  This was made with a latex glove filled with cement, and positioned just right, and while it was drying I pressed a small piece of wood in the palm of the hand to make the indent for the business cards.  
  2. PAINTED COASTERS FOR HALLOWEEN:  Simple project, purchased some cork coasters at our local store and spray painted them orange, then cut out some faces in card stock paper and painted the black faces on, then sealed the coaster with a nice coat of sealer.
  3. WOOD LOVE PLAQUE:  I made this item to sell on our eBay store and had great success!  It took quite a long time to cut this design out of wood, with all the curves it had, but it was well worth the time and effort.  To make the design of this plaque, I opened up Publishes and made four blank pages, then I played around with some fonts to see which one I liked best, then enlarged the font to a letter sized piece of paper, and printed it on card stock.  I then cut out each letter, and taped them together as the photo shows and used this as my template.
  4. PAPER MACHE TURKEY:
  5. CEMENT SKULL:  This was made from a cement skull mold and I mixed up some Quikrete, added a hook for hanging, and let it dry.
  6. CEMENT TEALIGHT HOLDERS:  Made from household containers, like a cologne box, or a plastic lid.  Very easy project to do!
  7. EEK HALLOWEEN DECOR:
  8. TREE BRANCH PLACE CARD HOLDERS:
  9. MELTED BEADS NIGHT LIGHT COVER:
  10. CEMENT “GROW” STEPPING STONE:  We purchased a neat cement mold from a seller on eBay and I made a few of these grow stepping stones.  The mold was amazing on how much detail it showed after it dried.  I love this!
  11. OOPS, A DUPLICATE – CEMENT TEALIGHT HOLDERS!
  12. WOOD LETTER “A” MONOGRAM:  I made this for Roy’s sister for Christmas!
  13. WOOD HOME IS WHERE THE HEART IS STRING ART PLAQUE:
  14. HEART SUN CATCHER FROM MELTING PONY BEADS:
  15. EASTER PLACE CARD HOLDERS USING WINE CORKS
  16. PATRIOTIC WOOD BOXES:  How I made these were actually from an idea I saw on someone’s blog, but they were making clay houses for their catus.  I liked the idea and made a bigger version and designed mine out of wood.  I have used these little wood houses all over the house and even used them on Fourth of July for silverware holders too!
  17. WOOD BAT:  I love all the wood bats that I have made!  I even hot glued some lights to the back of one and now it glows when I hang it on the wall!  Neat idea, eh?
  18. PAPER MACHE SNOWMAN:  This is one of my favorite craft projects!
  19. HALLOWEEN CEMETERY COLUMNS MADE FROM BOXES:  These columns are a big hit on Pinterest!  I made them from some leftover boxes (all of the same size) and taped them together with masking tape, then spray painted them to look like cement block.  Everyone loved this idea!
  20. MORE CEMENT SKULLS
  21. PATRIOTIC MONOGRAM FOR FRONT DOOR:  I hand drew a large “R” for my boyfriend and painted it in patriotic colors.  Got a lot of compliments on this!
  22. WOOD LETTER “N” LEASH HOOK:  I made this for our dog Nikita to hold all of her leashes.  I hot glued strong magnets to the back of it and it is now on our backdoor!
  23. PAPER MACHE PUMPKIN:  This is the first (of many) paper mache pumpkins that I will be making.  The process takes a long time, since you have to wait for each layer of paper mache to dry before adding the next layer, but we will be using lots of these pumpkins as props in our yard next Halloween.  We will also be selling them on eBay too once we get a few of them completed.
  24. WOOD “GROW” SIGN FOR OUR GARDEN:  Enough said about this garden sign – – you just want your garden to well, um….Grow!
  25. BENDABLE MUMMY GUY:  Just a little bendable mummy to sit on your shelf, or anywhere you wish him to be.  Lots of fun to make him and wrap him up in gauze!
  26. SOCK BUNNY TUTORIAL:  Now, these little bunnies will make a huge hit as a gift, for your pet, or placed in an Easter basket or Christmas stocking.  No matter how you use them, the recipient will be happy!
  27. REPURPOSING GARBAGE INTO MAGNETS:
  28. MOD PODGE COASTERS:
  29. PAPER MACHE TURKEY LEGS

So, with 2012 behind us now, I am looking forward to a new year and some new craft projects!  One idea that I am anxiously waiting to start, is making adorable pillows that will brighten any room, and also figuring out how to make little pillows with photographs on them.  I know that Mod Podge has a medium photo transfer paste to do just that, and I can’t wait to try it out.  I want to try my hand at making little “Animal Pillows” with Nikita and Bella on them.  You could place these on a chair, couch, or the bed for an adorable accent!  Obviously, this will make a great blog post tutorial when I figure it out!  I can’t wait.

In 2013, I also want to delve heavily into making paper mache pumpkins in all shapes and sizes!  Once I get a few completed, we will list them for sale on our eBay store.  What?  You did not know that we have an eBay store?  Shame on you!  You can view our eBay store by clicking on any of the buttons on the side of this blog!  As an eBay seller, we sell mostly seasonal items, and since we love Halloween, we thought that the paper mache pumpkins would be a huge hit.

Anyhow, looking back on the crafts that I made in 2012 has truly blown me away, as I amazed myself at how many things I actually created.  Look out 2013, I’ve got a lot of work to do!  🙂

How to Make a Night Light Cover from Melting Beads

Well, just when you think that you have exhausted all of your craftiness, we have gone and done it again!  Yep, we came up with a really neat way to make yourself a modern night light cover – – by melting some pony beads!

We headed out to the Dollar Store and picked up a Tinker Bell Night Light for $1 and knew that we could use this in our craft project.  The Tinker Bell front cover was removable (phew) from the night light and we were happy to see that, as we were prepared to cut it off if it was not.  (this saved us a step for sure)

Anyhow, if you viewed our first post on how to make a sun catcher from melting beads, you will remember how we got started.  If not, click here to catch up with the process.

First, we pulled out our metal mini loaf pan and started creating a design in the pan with pony beads.  Once we got our design complete, the next step is to head outside and get the grill all fired up.  Once the grill is nice and hot, place your metal loaf pan on the grill – – and watch as the beads start to melt.  This melting process takes between 10-15 minutes as the beads are laid in a single layer in the pan.  Once the beads are all melted, and you will know when to take them off the grill as the top of your design is all smooth with no bead bumps.  (once you do this, you will know what I mean)  Remove the pan from the grill (and remember that your pan is extremely hot) and let your pan cool.  Once the pan is cooled, just turn it over and tap the bottom of the pan and your melted bead design pops right out!

Now, comes the fun part – attaching your plastic design to the night light.  As we mentioned earlier, we removed the plastic Tinker Bell night light cover already, and since we did, we needed to add a little spacer between the night light and your new melted design, so we hot glued a clear pony bead to the front of the night light (which worked out perfectly).  If we did not add the clear bead to the front of the night light, our melted cover would have been a bit too close to the light bulb, so we did not want it to get too hot from the bulb and perhaps melt, so that is why we added a clear bead as a spacer.  Once the glue dried around the bead, we just hot glued the plastic design we just made onto the bead and just created the neatest modern night light cover ever!

The steps are quite simple, but making the bead design in the pan was the most fun part of this craft project.  You could go crazy and make all sorts of designs as the possibilities are endless.  Make some for yourself, your kids room, or even the kitchen as these will for sure be a great conversation piece!  Even make a night light cover so your pooch can see their water dish at night!

How to Make a Sun Catcher

I got my inspiration from I’m Feelin’ Crafty’s blog and just had to try this craft project for myself!  And, I am glad that I did!  This absolutely fun craft project uses those plastic pony beads found in any craft store, a pie pan, and your gas grill. That’s it!  If you would like to make some for yourself, keep reading for the steps on how to create some today for yourself!  These would also make some incredible gifts for Christmas too! 

Let’s begin…  First, you can use any metal pan in any shape, we used an aluminum pie pan for the one we just made, but the next time we make one we will use our metal pie pan instead.  The reason we will switch to the metal pie pan is so we don’t get the little indents on the bottom of the sun catcher from the aluminum pan.  The metal pie pan will have no indents on the bottom. 

Next, take out your platic pony beads and start placing them in your pie pan and lay them flat in the pan with the hole of the bead facing up.  Create any design you want, but keep all the beads close together.  Once you fill up your entire pie pan with your design, the next step is to melt them. 

Get your grill all nice and hot.  You can melt these in your oven at 400 degrees, but you may experience a nasty smell from the melting plastic, so we suggest you use your grill.  Place your pie pan in the center of your grill.  Creating your design was a lot of fun, but watching your beads melt was truly neat to watch.  You may have to turn your pie pan to ensure that all the beads melt evenly, so make sure you use a pot holder to touch the pie pan.  We had our pie pan on our grill for approximately 15-18 minutes.  You will know when to take the pan off the grill when you see a smooth finish on top of your design, as this shows that all the beads have melted completely. 

Remove from grill.  Your sun catcher will dry quite quickly, so make sure that nothing falls into the plastic as it is curing, like a bug!  Once you can touch the pie pan and feel that it has cooled, you can remove your sun catcher.  Carefully move the side of the pan a little and your sun catcher should pop right out! 

Now, depending on what you want to do with your new sun catcher, you can either leave it as is, or you can drill a small hole at the top to attach a suction cup for hanging.  (this is what we are going to do) 

The possibilites are endless of what you can make with this craft idea.  For example:  Try making some ornaments for your Christmas tree by using metal cookie cutters (just place the cookie cutters on a cookie sheet and fill the cookie cutters with beads), make some adorable gift tags, or even use a square cake pan to make a different shape.  Also, you can make yourself a wind chime too!  Just purchase a cheap wind chime from the Dollar Store, remove the chimes and attach them to your new sun catcher by drilling small holes at the bottom & attach the chimes!  Let your creativity go wild & have fun!  Don’t forget that this is a great craft project to do with your kids too!