Halloween Decorating Has Begun

I can officially say that I started our Halloween decorating today! I started pulling out all of my paper mache pumpkins, my paper mache mummy, my paper mache witch head that I am still working on, and the paper mache fireplace. I have had a few people ask to see the finished fireplace, so I made sure I got it in the photo!

MY PAPER MACHE PROJECTS

I still have a lot more pumpkins to unpack for our inside Halloween decorations, and I always bring out our lighted Halloween Willow Trees too to give the living room a nice eerie glow. Everything in the photo above, is made in paper mache!

I have also been working on a paper mache torso and I hope to get him finished before Halloween!  In case you are wondering how I created this torso, here’s how I started off:

HOW TO MAKE A PAPER MACHE TORSO

I wrapped my own body with clear packing tape from my waist to my neck. When you do this, the first layer of packing tape must be sticky side out so it does not stick to your clothing. Once you get the first layer of packing tape around your entire torso, you then keep wrapping with the sticky side towards you. What you are doing here, is making a nice form for a torso. Once you get enough packing tape around you, the next step is to get the form off of you. Either have someone cut the form off of you, or you can do it yourself, but be careful not to cut yourself!

Now you have a quick torso made! Just tape up the place where you cut yourself out from the form and you are now ready to paper mache your torso. I am sure that there are tons of other ways out there in the Halloween prop making world to thicken your torso other than paper maching it, but for now I am using the paper mache process. (just a reminder, my paper mache recipe is just water and flour made into a kinda pancake batter consistency)

MAKING HANDS FINGERS AND ARMSThe next step is to make some arms for your new torso. I just opened up the newspaper and took one sheet and rolled up some long strips, then rolled a few more sheets around that first one. Tape up the side so it does not unravel. Make two arms. Now you need to make the hands – just ball up some newspaper for the palm and tape it, then roll up some shorter strips of newspaper for the fingers. Tape the fingers to the palm. Don’t try to be too exact in the length of the fingers, because you are making a scary Halloween prop, ya know! The weirder the better, if you ask me. Now that your fingers are attached to the palm, attach them to the arm, and you are now ready to attach the arms to your torso.

TAPED UP HAND

I know that some of this sounds a bit too much, but it goes really quickly. Nothing has to be perfect at all because you don’t want a perfectly formed Halloween prop. Once the arms are attached to the torso, you can bend or crease the newspaper arms to whatever shape you want. Do you want your prop reaching out for you, or do you want it to be reaching up in the air, the choice is yours so make it any way you wish.

PAPER MACHE TORSO IN THE WORKS

Here is what the torso looks like now, just a few more layers of paper mache to go. HINT: For anyone attempting to make anything in paper mache, make sure you have lots (and I mean lots & lots) of layers of paper mache around your prop, otherwise can cave in. The arms on this torso prop are hard as a rock right now because it has many layers on it.

I will be adding a head to him this weekend so it will make him pretty close to completion. I am still tossing around the idea of putting him out in the yard, but I will need to seal all the paper mache really good so the weather does not ruin him. Flex Seal is what I would use on this guy if he heads outdoors.

It feels pretty good to look around our living room and see all of the paper mache items that I have made over the years. They were all easy to make, but they just take a lot of time to complete. Have you started on any new paper mache Halloween items this year?

 

Advertisements

HELLO FALL! How to Make Paper Mache Pumpkins

HOW TO MAKE PAPER MACHE PUMPKINS

Welcoming Fall is always fun, because I can start making more paper mache pumpkins! If you know me, you know that I have made many paper mache pumpkins, a paper mache mummy, and a paper mache fireplace. I had a thought that I wanted to try, and I decided to go “smaller” this time around with some cute paper mache pumpkins.

Here’s how I made them!

I started off with blowing up two balloons nice and small. I did try tying a string around one of the balloons, but it did not make a difference, so I did not use it on the second one.

PUMPKIN SMALL1

Next, I mixed up some flour and water and made a paper mache paste. That is all I use when making my pumpkins, and you want the paste to be like a pancake batter, not too thick, not too runny. (use a wire whisk when mixing up your paste)

Now comes the fun part! Make sure you have lots of little strips of newspaper cut up, dip each piece in the paper mache paste, and run the strip through two fingers to remove the excess. Then place piece by piece on your balloon. Run your fingers over each piece so that they are laying flat on the balloon. Keep going until the entire balloon is covered really well. Let your paste dry. I normally get out my small heater and place it next to my object to get it to dry faster. Once it is good and dry, you need to add another layer of paper mache newspaper strips all around the balloon. Let that layer dry, and keep doing this step over and over until you have a pumpkin that is so hard that you cannot push in any part of it. THIS PART IS EXTREMELY IMPORTANT.

PUMPKIN SMALL2

Once your pumpkin is formed and nice and hard, you are now ready to draw a face on your pumpkin. You can use a pencil to draw your face on, or a Sharpie Marker.

PUMPKIN1

Once you get the face drawn the way you want it, you carefully take your sharp knife out and cut out the face. Go slow in this process so you do not slip and cut yourself!

PUMPKIN2Since I am making really small pumpkins here, the openings on the face are too small for me to insert a battery operated tealight in it, so I cut a round opening in the back of the pumpkin for this purpose.

PUMPKIN5

Wait, I am not yet done yet at this point. Since the face and the hole in the back are now cut out, I want to make nice smooth edges around what I just cut out, so I placed a few more pieces of the newspaper strips dipped in the paper mache mix around the face and the hole in the back. Let it dry.

PUMPKIN4

Now it is time for the paper mache pumpkin to be painted. What I do for all of my paper mache pumpkins, is to lightly and I mean lightly, spray paint the pumpkins with flat black paint. I do not cover the entire pumpkin all in black, but rather get it slightly covered as a base coat.  Once the flat black has dried, I am ready for the orange top coat.

PAINTING BASE COAT

Just like the base black coat, I lightly spray paint my orange top coat over the pumpkin so that some of the black shows through. I think this make the pumpkin look so much better.

I decided that my pumpkins needed something. I felt that they needed to be on display, and what better way to display them than with a cute base! I used a $1 glass candle stick base that I found at the Dollar Store, and spray painted it with a Hammered Black paint. I went over the candle stick two times just to make sure that it was evenly coated. The last thing that I did was to spray paint a clear coat over the pumpkins to keep the paint sealed.

PAINTING THE BASE

BASE

The last thing that I did was to glue the pumpkin onto the candle stick base, and I now have an adorable pumpkin decoration! One thing to note when lighting up any paper mache pumpkins, is to never ever use a real candle in your pumpkins, as they could definitely catch on fire! Always use a battery operated tealight in them for safety!

PAINTING PUMPKINS ORANGE

My finished paper mache pumpkins are approximately 6″ and will definitely add some flare to my Halloween decorations around the house! Now that I see how cute these turned out, I have already started on a few more because I know that they will look great in every room of the house! Now, back to the Dollar Store for more glass candle sticks!

You Don’t Know Jack

The excitement is building around here for Halloween!  My calendar tells me that we have only 19 more days until Halloween, and I am frantically still trying to get all of my Halloween prep done.

I have been working on a few more paper mache pumpkins, yes, I am a glutton for punishment, but making these things is addicting!  Once you completely finish one, you have the craving to make MORE!  With each and every paper mache pumpkin I have made, I am getting better and more creative and I have definitely mastered the technique of using the jigsaw to cut out the pumpkin faces!  Here is what Pumpkin No. 6 looks like so far…

PUMPKIN NO 6 FACE DESIGN

PUMPKIN NO 6 CARVED FACE WITH JIGSAW

PUMPKIN NO 6 ORANGE LIGHTS

With Skully & his friends hanging out in the front yard, I decided that Skully needs to be holding a paper mache pumpkin.  (The pumpkin above will be what he will hold in his skeleton hand!) I decided that the pumpkin he would hold needed to be a bit smaller than the ones I have already made.  I just took a plastic grocery bag (ya know those little blue plastic bags at the grocery store) and stuffed it with lots of paper, then went to work!

Both Nikita and Bella take turns napping next to me on the kitchen floor while I am paper maching the pumpkins, and it is so cute.  Every few minutes, they peek at me to see what I’m doing, and back to sleep they go. I think that Nikita liked laying next to the little heater I have that is drying the pumpkins, while Bella sat by the back door, basking in the sun. (that is one of Bella’s favorite places to sit)  I think Bella loves sitting by the back door because she can see Molly, our neighbors dog when she comes outside.

NIKITA 10-11-13

BELLA SITTING IN THE SUN 10-11-13

Today, we’re going to be back out in the front yard adding more props and lights to our graveyard.  What?  You thought that we were done after you saw the photo’s of Skully & his friends?  Nope!  We have many more props to bring up from the basement to fill up the front yard, so keep watching to see how we transform our front yard into an awesome Halloween display.

On a special note for today, our wonderful next door neighbors are getting married!  Yep, Julie and Shawn are getting hitched and we could not be happier for them!  We saw Shawn drive away this morning in his white vintage Mustang, all dressed up and ready for his exciting day!  We wish them the best of luck & lots of love on their special day!  Congratulations!

How to Make a Paper Mache Stand

The possibilities are endless when you play around with Paper Mache.  For example, I ran into a little dilemma as I was trying to place my pumpkins in our front windows for display…I had absolutely nothing to put them on.  So, you know me, I had to figure out a way to correct this.

PAPER MACHE STAND

For those of you that know us, we sell tons of seasonal items on eBay. (this is our busiest selling season with all of our Halloween props that we have) With that being said, we need boxes, and lots of them, because you just never know what size of box you need to ship your product out.  Our local KMart has been quite helpful with providing us with boxes, we keep every box from deliveries to the house, and we even have asked our neighbor to give us all of their boxes too! (thanks Steve!)  And, on top of this, I sometimes keep boxes from things that we purchase, just in case I might need them some day….for something.

PAPER MACHE STAND WITH PUMPKIN

I started stock-piling some nice perfectly square hard cardboard kitty food boxes and when I saw them, I knew that I could use these to make a little stand for my pumpkins.  Then I pulled out two small UPS boxes that I kept from a delivery and thought that they would be perfect for the top/bottom of the stand.  Now, I just had to get to work!

STAND PAPER MACHE

All I did was use some masking tape (do not use clear shipping tape) and taped three kitty food boxes together to make a little column, then I taped a UPS box to the top and one again to the bottom.  I went over all the seams again with another layer of masking tape to make sure that everything was good and secure.  (note: you could also use your hot glue gun to adhere them together too)  This was the perfect height for our windows for the paper mache pumpkins to sit on!

PAPER MACHE STAND PAINTED BLACK

Then, I just mixed up some paper mache and went over the entire stand with a few layers and placed it in front of my little heater to dry.  Once dry, I took it outside and spray painted the stand all black.  Whala!  Now, wasn’t that easy?  This stand is so cute, that I might even stencil something on it.

PAPER MACHE STAND AND PUMPKIN NO 5

The funny thing about this is, that you would never know by looking at it, that this was made from boxes of kitty food!  What have you re-purposed lately?

Paper Mache Pumpkin No. 5

I can’t help myself.  These pumpkins are addicting to make.  I am on Pumpkin No. 5 right now, and have No. 6 in the works.  Pumpkin No. 6 will be a much smaller pumpkin that I am going to pose in the hand on Skully in the front yard as he is holding up my handmade pallet coffin.

HOW TO PAPER MACHE A PUMPKIN

PAPER MACHING PUMPKIN NO 5

Pumpkin No. 5 is by far my thickest pumpkin ever!  I used my Evolv Jigsaw and a drill to carve out the face.  You start with the drill to make an entry point for the saw blade, then slow the speed down on your jigsaw a bit and carefully follow the face drawn on the pumpkin.  

CUTTING FACE OUT WITH JIGSAW

I drew a few mouths and eyes by hand on the pumpkin before I found one that I liked.  I know, they all could have been ok, but since I am perfecting my pumpkins as I work with the paper mache, I am going for perfection.  After I got the face that I wanted, it was time to get to work and cutout the face.

PAPER MACHE PUMPKIN NO 5 CLOSEUP

I cut one of my pumpkins with an Xacto Knife, but that took me close to an hour to cutout the face, so I changed to the Evolv Jigsaw to make this part of the process much quicker.  You have to be extremely careful when using any saw, but you work slowly and keep all of your fingers out of the way of the blade, and you will be ok.

REMOVING STUFFING

I have learned a lot from making all of these paper mache pumpkins, and one thing that I have learned is that you MUST stuff the plastic bag really full of crumpled newspaper so that the pumpkin holds its shape.  This photo shows how much “stuffing” came out of this pumpkin.  When you remove the stuffing (aka, crumpled newspaper) from the pumpkin, you keep it for your next pumpkin.  Why reinvent the wheel and crumple more paper, when you already have a bag full of stuffing!

PAPER MACHE PUMPKIN NO 5 GLOWING

Since these pumpkins are not sealed for outside weather conditions, we are currently only placing them in our front windows at night so everyone can see them.  If we left them outside, they probably would be damaged due to water or the dew that sets in overnight.  I might try some of that Flex Seal product on one pumpkin before I paint it, to see if that product will work with sealing the paper mache and holding its shape.  Anyhow, with the amount of pumpkins I have now, I wanted to place them in the windows, but had no table to place them on.  Had to fix this problem…

With all of my craft projects, I use what we have around the house.  I save a lot of odd things, just in case I need them, one being the nice hard cardboard kitty food boxes.  These came in handy for making a table.  I just took three empty kitty food boxes and two old UPS shipping boxes and taped them together.  Then I mixed up a batch of paper mache (flour & water) and went to work!  The UPS boxes made the perfect top & bottom to my little table, as the kitty food boxes made the perfect column.

PUMPKIN ON STAND

So, what do you think of Pumpkin No. 5?  It still needs to be painted, but it looks great in the front window, even unfinished.  I also used one of our LED camping lights inside this pumpkin instead of the orange Halloween lights which makes it glow differently than the others.  Variety is the spice of life!

Work in Progress: Paper Mache Mummy

 

MUMMY FACE

It stinks when you run out of gauze!

I was trying to finish the paper mache Mummy yesterday, and ran out of gauze.  Man, they don’t give you much in that box.  So now I will head back to the store today to get more.  And, before I forget to bring it to your attention, please note that his fingers are now bent the way they should be! I brought out my handy little glue gun, and I glued his fingers in the position I wanted them!  Worked perfectly!

ADDING GAUZE ON MUMMY

I truly love how this little guy is turning out, and it has inspired me to try to make another one or a few more!  Making little paper mache people or mummy’s is not hard at all, as long as you know how to roll up a piece of newspaper and use masking tape to hold the pieces together.  You don’t have to unstuff the mummy, just create him and paper mache him and you’re done!  Unless you want to paint something fancy smancy on him.

For my Mummy, all I did was unroll the gauze a little and cut a nice length of it, dipped it into my paper mache mix (aka: flour & water) squeezed out the excess mix, and then tried to lay it nice and flat on the mummy as I wrapped the piece around him as far as it would go.  Then cut another piece of gauze, and so on.  Then I ran out.  What I liked about using the gauze, is that it dried so nicely!  It almost felt like a cast that you wear if you arm was broken.  I even left a few ends of the gauze “hang” because when was the last time you saw a perfectly wrapped Mummy?

MUMMY SAYING HI

I have a photo of him with two blue push pins, and those will be his eyes.  I am going to use my Sharpie marker and make the eyes black, but I wanted to show you how cute he looks with eyes!

MUMMY AND PUMPKIN

The mummy looked really awesome standing on top of the mantel next to one of the paper mache pumpkins, as I was right, he is the perfect addition to the Halloween display!  You gotta love it when things come together like this!  But speaking of coming together…. I switched out the white LED lights from inside the pumpkins, and used an orange string of Halloween lights instead, and it totally changed the whole look of glowing pumpkin! With the yellow insides painted on the pumpkin, the orange lights really show up nicely!  (In the photo below, I had to laugh as that bright red streak in the photo is a car’s tail light that whizzed by as I was taking this photo)

PUMPKINS IN THE DOORWAY

I can’t tell you how much I am thrilled on how all of these little projects are turning out! I still can’t believe that I personally made them, but I did, and I guess you just never know what you can do….unless you try!  I hope that some of my projects have inspired you to give paper mache a whirl!

Paper Mache Mummy

Geez, I could not resist!  After publishing my last post, and a few people commented on the cute mummy at the garden center, I just had to see if I could create one!  You know me and challenges…. I took it head on and got to work right after hitting “publish”.

MUMMY COLLAGE

It came together quite easily and he now stands 18″ in height and is 14″ in width.  I just basically balled up some newspaper for the body, and did the same for a head, then masking taped them together.  Next I rolled up some newspaper for the legs, arms, and fingers.  I took two small pieces of paper and balled them up for the feet and did the same for the palm of the hands. Then I had a brilliant idea to use my hot glue gun to attach the fingers to the palm instead of masking tape, and I did the same for the arms when I attached them to the body.  (NOTE:  Look at the first mummy on the left…. as you can see, his fingers are bent, so I will still need to do this on mine!  I have to make it look similar, right?)

PAPER MACHE MUMMY

I am going to start on the first layer of paper mache in a few minutes and once dried, I will place many more multiple layers as I have done in all of my paper mache work.  Then, to finish off the mummy, I will take some strips of newspaper, roll them up, then flatten them, and dip them in the paper mache mixture, and these will be used for the look-alike strips of white cloth that wraps all around the mummy.

PAPER MACHE MUMMY HAND

MUMMY HAND

So, what do you think?  He came together so fast and will be a quick and easy paper mache project!  He will be a perfect addition to the top of my paper mache fireplace with all the pumpkins!  Stay tuned to see how he turns out!

THE MUMMY

Halloween Snuck Into My Weekend

It does not surprise me, or probably you if you know me, that Halloween snuck into my weekend in a big way.  You all know that I have been busy working on all of my paper mache pumpkins and paper mache fireplace, and this weekend I kicked it up a notch and got the chance to get some painting done.

WORKING ON MY FIREPLACE

I got the final black coat of paint on the fireplace and let it sit out in the sun today to dry.  I missed the entire Brown’s home opener game, but that’s ok as I heard that they lost in a big way. (does not surprise me at all)   We went to Pat Catans craft store this weekend in the hopes of finding a diamond stencil to use on the front & sides of the fireplace, and we had no luck.  So instead, I found a Zig Zag stencil that I am going to use to stencil a white zig and a lot of zags across the fireplace.  I can’t wait to get started working on the stenciling part, so hold tight for a little bit to see the results!

PAINTING INSIDE JACK SKELETON

PAINTING JACK SKELETON

As for my Jack Skeleton paper mache pumpkin, I had to cutout a slit in the bottom of the pumpkin so I could get the camping light inside.  The hole I originally cut was only just big enough to pull out all the stuffing, but not big to insert the camping light, so I had to make a little tweak to getting the light in.  I spray painted the first coat of Rustoleum Marigold inside the pumpkin, as I have read that you should use a color that is bright so your light glows brighter.  I then lightly spray painted the outside of the pumpkin black so it covers the newspaper well.  I will then spray paint the pumpkin orange on top of the black to finish coloring the pumpkin.  After these colors dry, I will seal the pumpkin both inside and out with a clear sealant.

Our Jack Skeleton pumpkin almost caught on fire tonight too when I put the camping light inside of it.  I turned on the light and walked outside to take a photograph to see how the Marigold color looks and when I came back into the house to set my camera down, I turned around and smoke was coming out of his eyes!  I ran to Jack and saw that the camping light was smoking and got my Sweetie to pull the light out.  We switched batteries in the camping light from regular AA batteries to a Lithium battery and they must have been too much for the camping light as it got fried.  So now we need to head back up to the Dollar Store to purchase another one.  Thank God the pumpkin did not catch on fire with all the fresh spray paint on it!  When we get a new camping light, we are definitely only going to use regular AA batteries in it this time!

WOOD TOMBSTONES

Keeping up with the Halloween weekend, we sold a few of our wood tombstones that we have on eBay.  I just finished cutting out and sanding these two and another sale came in for one more.  WOW!  I guess everyone is thinking of Halloween, and it’s not only just us!  (and yes, I know how to use power tools too!)

FRONT PORCH FLOWER POT

PUMPKIN LIGHT ON PORCH

Our front porch has a little Fall coloring going on too, as our Marigolds are blooming in bright colors and I added our little glass pumpkin to the planter and lit a tealight in it tonight.  Right on the step of the porch sits my cement X & O and cement skull to add the perfect touch!

BAT ON OUR MAILBOX

And just when I thought the weekend was over and all the Halloween stuff was done, evening set in and provided yet another remarkable Halloween scene.  The sun was setting in beautiful colors that illuminated the black wood bat that proudly is perched on top of our mailbox post.  What a great weekend we had full of Halloween!  I wonder what next week will hold for us?!

How to Make Paper Mache Pumpkins & More!

JACK SKELETON PAPER MACHE PUMPKIN

Let’s get down to business… so you want to learn how to make a paper mache pumpkin?  You’ve come to the right place, so let’s get started.

PAPER MACHE PUMPKIN GRIN2

Here’s what you will need to create a paper mache pumpkin:

  • Newspaper & lots of it for the stuffing
  • Newspaper ripped into nice even strips
  • Plastic Bag (any size will do)
  • String
  • Metal Coat Hanger
  • Large Bowl
  • Flour
  • Water
  • Whisk
  • Xacto Knife or Jigsaw

That’s all you need to create anything in paper mache!  And you thought it was going to be hard to do.  I’ll be honest with you, it is not hard at all, but it does take time…. drying time, that is.

If you are sitting here reading this post and have even slightly considered trying to make some (or one) paper mache pumpkins for yourself for Halloween or even for your Fall decor, now is the time to do something about it!  Creating paper mache objects is fun and easy to do with your family and kids, but I am sure that they will get bored easily when it comes to the “drying time” in between all the layers you need to put on. I hope that I can inspire you to create your own pumpkins for Halloween, and if you do, please share with me what you have made!

Creating paper mache pumpkins is a lot of fun, especially when you start to see your pumpkin coming to life, and well, actually looking like a pumpkin.  I admit it, I start one pumpkin, and right after the first layer dries, I want so badly to paint it already, but know that I am not even close to being done yet, as it has many more layers of paper mache to go before it is completed.

So you have the list of things that you need (above) to start creating your first pumpkin, so let’s begin….

THE PLASTIC BAG

TIE STRING AROUND BAG TO FORM PUMPKIN

Start with any sized plastic bag you wish.  I have used those white tall kitchen bags, and even the large 33 gallon ones too, so it all depends on the what size of pumpkin you want to create.

Now, grab a stack of newspaper and crumble up the pages (but not too tight) and stuff them in the bag.  Stuff the bag as much, or as little as you want, but your “pumpkin form” should be somewhat firm or your pumpkin shape will flatten when you start applying the paper mache.  (you’ll understand this concept more clearer when it happens on one of your pumpkins!)

Once you have the bag filled with enough crumbled newspaper, you need to tie off the top of the bag.  You can use the handles on the bag or just twist it at the top, or you could use twine or masking tape too.

Now that your bag is filled and the top is tied, you need to create the stem for your pumpkin.  I have used a few methods for a stem, but you can be creative in this step. Take a metal clothes hanger and snip off the top part.  You will now be wrapping the metal clothes hanger around the top of your pumpkin to start your stem.  (you can even poke the clothes hanger into the section where you tied the bag)  Form the clothes hanger now into any “stem shape” you want.  I have done some nice curvy stems with a clothes hanger.  Just so you know the reason you are using a clothes hanger in this step, is because it will hold its shape when you start applying the paper mache to it.  (believe me, on my first pumpkin I did not use a clothes hanger in the stem and just rolled up some newspaper, dipped it in the paper mache, and thought it would keep its shape.  It did not)  Any questions on this part, just ask me.

Now, you have created your basic pumpkin form & the stem!

THE STRING

I bet you are wondering what the string was for, right?  Well, the string plays an important part in your pumpkin, as it creates the natural-looking pumpkin creases. You know what I’m talking about…those nice lines that run down the side of the pumpkin!

Start by tying your end of the string to your stem.  Pull the string down the side of your plastic bag (and pull kinda tight) and you will see a crease starting.  Now, wrap the string up and around the other side, come up to the top (wrap it around the stem, again) and go down another side and up again, until you have created all the creases you wish on your pumpkin.  Make as many as you want or just a few.

Now you have created your pumpkin creases!  Congratulations!  Are you excited yet?

GET READY TO PAPER MACHE

PAPER MACHE MIX

Now, it is time to start the paper maching process!  Grab that large bowl, your whisk, and your bag of flour and head on over to your sink.  Place your bowl in the sink, dump some flour into the bowl (you don’t have to measure the amount of flour you use) and add some water.  Start whisking immediately!  You want to add enough water (but slowly) to make a pancake-like thick (but not too thick) batter.  Believe me, you will get better at mixing your batter with all the layers you will be adding, so don’t worry at this point, just make sure that your batter is not too thick or too watery.

Grab that huge pile of ripped up strips of newspaper because you are ready to start paper maching your pumpkin.  Make sure your pumpkin is on a plastic tarp or something to cover your floor, as this part can be a bit messy.

FIRST LAYER OF PAPER MACHE

Take one newspaper strip and lay it flat into the paper mache batter and either run the strip between your two fingers to remove the excess paper mache, or you can do what I do and run the newspaper strip up the side of the bowl and rub off the excess batter this way.

Now, just place your first batter-dipped piece of newspaper on top of your pumpkin. You need to always start at the top of your pumpkin and work your way down.  Once you get one layer on the top half of your pumpkin, you need to let it dry or place it in front of a small heater like I do, to hurry along the drying process.  Then, you flip your pumpkin over and paper mache the bottom half, and let the bottom half dry.  Once the entire pumpkin has one layer on it, and it has dried thoroughly, you will need to add more layers.

IMPORTANT TIPS:  When adding your first layer of paper mache, make sure you use your finger tips to poke your newspaper strips nicely into the creases you made with the string.  This part is important as it adds character to your pumpkin.

Also, make sure you run your hand flat over each strips when applying them to squeeze out any excess paper mache batter.  Always keep running a flat hand over your strips as you work your way around the pumpkin.  Another good tip is to position your layers in different directions on your pumpkin, as this will add strength when it hardens.

I have had a lot of people ask me the question “How do I know if I have enough layers of paper mache on my pumpkin?”  Well, that is a good question and can be easily answered.  After each layer of paper mache has dried, gently push down on your pumpkin all around and if there is any “give” on the pumpkin….. it needs more layers. Your completed pumpkin should be very hard when you tap or knock on it.

CUTTING THE FACE

CUTTING PAPER MACHE PUMPKIN WITH A JIGSAW

When you have completed your paper mache pumpkin and feel that it is hard enough with no “give” on any part of it, it is time to cut out your face.

ADDED TEETH TO PUMPKIN

Look at your pumpkin.  Twist it around to see what side looks best to cut out a face on it.  Once you find the side you like, simply draw a face on the side of your pumpkin with a pencil.  Start off with a pencil so you can make changes if you don’t like what you drew, then go over your pencil marks with a Sharpie Marker when you are satisfied.

ADDING DEPTH TO EYES

I used to cut the faces out of my pumpkin with an Xacto Knife, but ever since I have increased the layers on my pumpkins to make them thicker, I found that an Xacto Knife was too hard to use.  So, I resorted to my trusty Jigsaw.  On my pumpkins, I just drill a hole large enough for my Jigsaw blade to fit in.  You could also use a Dremmil too if you have one to cut out the face.

Once your face is cut out, you will now need to REMOVE all of the newspaper stuffing & plastic bag from inside your pumpkin!  The reason you do not remove the stuffing before is because the stuffing is holding the shape of your pumpkin.  You will need to get your Xacto Knife or Jigsaw and cut a circle on the bottom of your pumpkin.  This is where you will pull all of the stuffing out from.  Remove all the newspaper (and keep the stuffing too, so you can use it on your next pumpkin) and carefully pull the plastic bag out too that is now stuck to the inside of your pumpkin.  The string is probably stuck to the inside sides as well, and you can remove that too, but be careful when pulling this out, as you do not want to damage your pumpkin.  Make sure that everything is cleaned out from the inside of your pumpkin at this point.

You will need to add more paper mache strips around the cutout face edges to finish off the edges nicely.  The hole at the bottom of your pumpkin will be used to place your battery operated light inside your pumpkin after you paint it.  I was going to use these small battery operated LED lights that I have, but realized that I wanted more light to make my pumpkins glow.  I found a round Camping Light at the Dollar Store for $5 which has different light settings and is brighter than the other LED’s, so this is what I will be using in my pumpkins.

CAMPING LIGHT

PAINTING THE PUMPKIN

Yeah, it’s finally time to paint your pumpkin!  Congratulations!  You have accomplished a lot, but have created a one-of-a-kind pumpkin that you will cherish forever!

Take your pumpkin outside for some good ventilation, and pick out the colors you want to spray paint it.  TIP:  I have learned from some experienced pumpkin creators, that you should spray paint the inside of your pumpkin yellow.  They use yellow inside their pumpkins so when lit, it makes them glow better, but you can use orange or whatever color you choose, as this is YOUR pumpkin.  I would spray paint the inside of the pumpkin first, let it dry.  Then place some newspaper inside the pumpkin to cover up the face holes when spray painting the outside, as you do not want any over spray to get inside.

Once the spray paint has completed dried, spray a clear coat over the entire pumpkin, both inside and out.

You are now officially ready for Halloween!

These are the pumpkins that I am currently working on, in various stages (and I am starting on a new one today too).

MY PAPER MACHE FIREPLACE

Just starting to paint the fireplace.

BeFunky_FIREPLACE GETTING PAINTED

This is a photograph that I found on how the finished fireplace will look.  I will spray paint the entire fireplace black, then I will hand stencil the white diamonds all over the front and sides/back of the fireplace.  (by painting it these colors, I can also use this fireplace for Christmas time too!)

BeFunky_THE FINISHED LOOK

MY PAPER MACHE PUMPKINS

PAPER MACHE PUMPKINS

As you can see from above, my huge Jack Skeleton pumpkin has the camping light inside of it.  Isn’t it bright?

Stay tuned, as I work on finishing all of my pumpkins, the fireplace, and the paper mache witch that I am currently working on.  You will be amazed at the end results!

 

Paper Mache Halloween Projects

PAPER MACHE PUMPKIN WITH CURVED MOUTH

I know what you’re thinking, what are you doing talking about Halloween in July, right? Well, we LOVE Halloween and it takes time for us to prepare anything new for our Home Haunt, so we have to start early.

Paper Mache projects take a lot of time, with all the layers you need to attach, and with each layer, you need to do a lot of waiting to make sure each layer dries thoroughly before the next one is placed.

To start making a paper mache pumpkin, you can use whatever form you want, but I start usually with a large bag and fill it up with balled up newspaper or any other filling you can find.  Then, once the form is made, I take string and pull it up along the sides to make those nice indents along the sides of the pumpkin.  Next, you need to decide on how you are going to create the stem.  Sometimes, I just tie up the top of the bag for the stem and paper mache over it, other times, I take some newspaper and wrap it around a piece of wire so I can bend the stem in a funky shape.

PAPER MACHE FIREPLACE

I am currently working on a Haunted Fireplace for us to use either in the house as a decoration, or we can use it outside on Halloween night for another prop.  I am planning on setting some of my paper mache pumpkins on top of the mantel of the fireplace when I am done for a nice effect.

PAPER MACHE FIREPLACE CLOSEUP

The one thing that I will need to work on and figure out how to do this, is to create a fake fire for the fireplace.  I have seen some neat effects of people using an old wire garbage can, a small fan, some red & orange lights, and some pieces of material.  The concept of this is to place the fan in the bottom of the garbage can so it blows upward and “moves” the pieces of material cut into flame shapes while the red and orange lights create the color of fire.  We’ll see if I can get this to work, when I get to that point or step in my process, but it surely will be interesting if I can pull this off.

PAPER MACHE PUMPKINS IN PROGRESS

If anyone would love to do some paper mache pumpkins for Halloween and need some help getting started, let me know and I will be more than happy to assist you.  I am far from being an expert on this, but with the more items that I make, I am learning some neat tricks along the way.

2012 Craft Projects Review

2012 Craft Projects by Valerie

I can’t believe yet another year passed us by, as 2012 came to an end and we’re ready to start a brand new year….and some new craft projects too!  I thought it would be fun to share with you some of the craft projects that I made last year, and I definitely look forward to a new year of inspiration and creativity as I delve into some new areas.  I am sure that I have overlooked a lot of crafts for this post, but not because I did not like the outcome of them, rather the amount of them, and it was hard to choose which ones to show.

Not all of my crafts had a DIY tutorial with them, but I wanted to share with you the large list of projects that I tackled this year, which actually surprised me when I was putting this post together.  Looking at the photo above, from left to right, are just a sampling of the crafts I made:

  1. CEMENT HAND BUSINESS CARD HOLDER:  This was made with a latex glove filled with cement, and positioned just right, and while it was drying I pressed a small piece of wood in the palm of the hand to make the indent for the business cards.  
  2. PAINTED COASTERS FOR HALLOWEEN:  Simple project, purchased some cork coasters at our local store and spray painted them orange, then cut out some faces in card stock paper and painted the black faces on, then sealed the coaster with a nice coat of sealer.
  3. WOOD LOVE PLAQUE:  I made this item to sell on our eBay store and had great success!  It took quite a long time to cut this design out of wood, with all the curves it had, but it was well worth the time and effort.  To make the design of this plaque, I opened up Publishes and made four blank pages, then I played around with some fonts to see which one I liked best, then enlarged the font to a letter sized piece of paper, and printed it on card stock.  I then cut out each letter, and taped them together as the photo shows and used this as my template.
  4. PAPER MACHE TURKEY:
  5. CEMENT SKULL:  This was made from a cement skull mold and I mixed up some Quikrete, added a hook for hanging, and let it dry.
  6. CEMENT TEALIGHT HOLDERS:  Made from household containers, like a cologne box, or a plastic lid.  Very easy project to do!
  7. EEK HALLOWEEN DECOR:
  8. TREE BRANCH PLACE CARD HOLDERS:
  9. MELTED BEADS NIGHT LIGHT COVER:
  10. CEMENT “GROW” STEPPING STONE:  We purchased a neat cement mold from a seller on eBay and I made a few of these grow stepping stones.  The mold was amazing on how much detail it showed after it dried.  I love this!
  11. OOPS, A DUPLICATE – CEMENT TEALIGHT HOLDERS!
  12. WOOD LETTER “A” MONOGRAM:  I made this for Roy’s sister for Christmas!
  13. WOOD HOME IS WHERE THE HEART IS STRING ART PLAQUE:
  14. HEART SUN CATCHER FROM MELTING PONY BEADS:
  15. EASTER PLACE CARD HOLDERS USING WINE CORKS
  16. PATRIOTIC WOOD BOXES:  How I made these were actually from an idea I saw on someone’s blog, but they were making clay houses for their catus.  I liked the idea and made a bigger version and designed mine out of wood.  I have used these little wood houses all over the house and even used them on Fourth of July for silverware holders too!
  17. WOOD BAT:  I love all the wood bats that I have made!  I even hot glued some lights to the back of one and now it glows when I hang it on the wall!  Neat idea, eh?
  18. PAPER MACHE SNOWMAN:  This is one of my favorite craft projects!
  19. HALLOWEEN CEMETERY COLUMNS MADE FROM BOXES:  These columns are a big hit on Pinterest!  I made them from some leftover boxes (all of the same size) and taped them together with masking tape, then spray painted them to look like cement block.  Everyone loved this idea!
  20. MORE CEMENT SKULLS
  21. PATRIOTIC MONOGRAM FOR FRONT DOOR:  I hand drew a large “R” for my boyfriend and painted it in patriotic colors.  Got a lot of compliments on this!
  22. WOOD LETTER “N” LEASH HOOK:  I made this for our dog Nikita to hold all of her leashes.  I hot glued strong magnets to the back of it and it is now on our backdoor!
  23. PAPER MACHE PUMPKIN:  This is the first (of many) paper mache pumpkins that I will be making.  The process takes a long time, since you have to wait for each layer of paper mache to dry before adding the next layer, but we will be using lots of these pumpkins as props in our yard next Halloween.  We will also be selling them on eBay too once we get a few of them completed.
  24. WOOD “GROW” SIGN FOR OUR GARDEN:  Enough said about this garden sign – – you just want your garden to well, um….Grow!
  25. BENDABLE MUMMY GUY:  Just a little bendable mummy to sit on your shelf, or anywhere you wish him to be.  Lots of fun to make him and wrap him up in gauze!
  26. SOCK BUNNY TUTORIAL:  Now, these little bunnies will make a huge hit as a gift, for your pet, or placed in an Easter basket or Christmas stocking.  No matter how you use them, the recipient will be happy!
  27. REPURPOSING GARBAGE INTO MAGNETS:
  28. MOD PODGE COASTERS:
  29. PAPER MACHE TURKEY LEGS

So, with 2012 behind us now, I am looking forward to a new year and some new craft projects!  One idea that I am anxiously waiting to start, is making adorable pillows that will brighten any room, and also figuring out how to make little pillows with photographs on them.  I know that Mod Podge has a medium photo transfer paste to do just that, and I can’t wait to try it out.  I want to try my hand at making little “Animal Pillows” with Nikita and Bella on them.  You could place these on a chair, couch, or the bed for an adorable accent!  Obviously, this will make a great blog post tutorial when I figure it out!  I can’t wait.

In 2013, I also want to delve heavily into making paper mache pumpkins in all shapes and sizes!  Once I get a few completed, we will list them for sale on our eBay store.  What?  You did not know that we have an eBay store?  Shame on you!  You can view our eBay store by clicking on any of the buttons on the side of this blog!  As an eBay seller, we sell mostly seasonal items, and since we love Halloween, we thought that the paper mache pumpkins would be a huge hit.

Anyhow, looking back on the crafts that I made in 2012 has truly blown me away, as I amazed myself at how many things I actually created.  Look out 2013, I’ve got a lot of work to do!  🙂